JR Z9100HVT HIGH VOLTAGE ULTRA TORQUE SERVO

$199.99

Availability:
Out Of Stock
Product Code:
JR Z9100HVT HIGH VOLTAGE ULTRA TORQUE SERVO
Brand:
JR Servos

Not yet rated
Write a review

Description

JR Z9100HVT HIGH VOLTAGE ULTRA TORQUE SERVO

Overview

JR - JRPSZ9100HVT - Z9100HVT High Voltage Ultra Torque Servo

Battery chemistries such as LiPo, LiIon, and LiFe have become very popular within the RC community. They are the standard for powering electric motors and have also gained popularity as receiver battery packs. The issue is the output voltage of these batteries is higher then the previous standard 4 - and 5-cell NiCd and NiMH packs, 4.8V and 6V respectively. The higher voltage is not an issue with the receivers but can be for the servos. Many servos will not operate at these higher voltages for very long before burning out the motors or electronics.

To get around this issue modelers have had to use a regulator to drop the voltage to an acceptable operating range for their servos, usually around 5 to 6 volts. The addition of a regulator adds a component that, should it fail, can cause the loss of a model.

JR’s HV servos are designed with motors and electronics that operate off the direct voltage of a 2-cell LiPo, LiIon, or LiFe receiver battery pack (6.6V to 7.4V nominal voltage). This eliminates the need for a regulator and lowers the chance for a power failure that can cause a catastrophic failure of your model. Also note that the HV servo specs are shown at the higher voltage (7.4V 2S LiPo) but will still operate on a standard 5-cell 6V NiCd, Ni MH battery with a reduction in performance of approximately 10% in speed and torque.

Features

JR - JRPSZ9100HVT - Z9100HVT High Voltage Ultra Torque Servo

  • Rugged new aluminum case
  • JR® SuperSteel™ gears for high precision, long wear
  • Exclusive motor designed for high voltage applications
  • Outstanding precision combined with outlandish performance

Specifications

JR - JRPSZ9100HVT - Z9100HVT High Voltage Ultra Torque Servo

  • Size Category: Standard
  • Type: Digital
  • Application: 1/8, 1/5 on-road, off-road surface vehicles steering
  • Torque: 480 oz/in (2S Li-Po)
  • Speed: .12 sec/60°
  • Length: 1.58 in
  • Width: 0.82 in
  • Height: 1.57 in
  • Weight: 2.6 oz
  • Bushing Or Bearing: Bearing
  • Bearing: Dual
  • Motor Type: Coreless
  • Connector Type: JR
  • Gear Type: Metal
  • Gear Material: SuperSteel™
  • Voltage: 7.4V (2S Li-Po)
  • Deadband: Surface optimized

Reviews (0)

Write a review

Note: HTML is not translated!

Bad            Good


Continue

Aero Graphix

Thank you for your interest in Aero Graphix. We are the country's premier vinyl graphics supplier for model and full scale aircraft decals and striping. Nothing is too large or small for us to cut for you. We have a wide range of professional vinyl sign manufacturing equipment that insures you receive the best quality product you can buy. We pride ourselves on manufacturing the finest quality graphics available.

Contact Us

phone: 573-368-3600
fax: 573-368-3800
Contact us in the Customer Service Section

Facebook